![]() There is a short black tube on the left wire, long black tube on the middle wire and no tube on the right wire.Ĭarefully disconnect the webcam cable from the logic board. If you look closely, you’ll see that each cable is marked. Unlock the display LVDS cable by lifting up the metal bracket.Ĭarefully pull the display cable out of the connector.ĭisconnect three antenna cables from the wireless card. Each bracket is secured by one Torx T5 screw. Try to keep the adhesive tape intact so you can reuse it. There is adhesive tape on the bottom side of the rubber cover. You should always disconnect the battery while working with the internal components.Ĭarefully lift up the battery connector and separate if from the logic board. Separate the bottom cover from the body and remove it. Two screws that I marked with yellow circles are shorter than screws marked with red circles. For this you will need a special P5 Pentalobe screwdriver. Reconnecting or replacing the display LVDS cable should be the first thing to try because it’s the cheapest option.įor this repair you will need screwdrivers for Apple laptops.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |